| Details | |
|---|---|
| Type | Standard Car |
| Year | 1984 |
| Manufacturer | Ford |
| Model | SIERRA XR4 I |
| Engine Size | 2,792 cc |
| Transmission | Manual |
| Colour | White |
| Model Year | 1984 |
| Fuel | Petrol |
| Previous Owners | 6 |
| Reg. Mark | B*** *** Get the Vehicle Status Report |
| VRM | B*** *** |
Ford Sierra Xr4i V8
Ford sierra XR4i V8 conversion ( rear wheel drive , this is NOT the 4 wheel drive one )
needs to be finished
i'v made a prop but could do with balancing ( this is fitted ) , and disc's and pads fitted and a set of wheels . it has 4 odd steel wheels to move it on , this is so close to completion . all the gages work including rev counter .
apart from this it is complete , all new drilled and grooved disc's with new pads are included in sale .
engine's in and running , all watered up with anti freeze , brand new clutch kit with lightened and balanced fly wheel , new brake line's all round + braided hoses all round with a line lock to disengage the rear brakes for burn outs , lt77 gear box from an sd1 , gear stick's all in , rads fitted with electric fans , brand new suspension fitted all round , the car has been painted under Neath (white ). never been welded . ( apart from were i mounted the engine ) , allso fitted are converted tr8 exhaust manifolds .
this is a very reluctant sale
please no time wasters this car will need recovering , i have the old type log book , when i brought the car it had been dry stored for 13 years .
any viewing welcome and CASH on collection .
any questions please call me on 07729301718
i would recommend having the prop balanced and checked
fit new rear disc's and pad's ( supplied )
fit front disc's & callipers + pad's . ( supplied )
wheels ( comes with 4 odd one's just to roll it around on )
exhaust clamp i think its a 3 and a half inch .
a few bulbs .
alternator tensioner bracket .
i made blocks to drop the anti roll down ( to allow room for the lt77 gearbox bell housing ) need's a weld on either side .
i'v brought heat rap for the down pipe's , needs fitting ( i thought this would help displace the heat under the bonnet ) not required but supplied .
poly bushes are fitted in the front lower arms + anti roll bar ( already fitted )
thats it .
| Parts & Accessories |
|---|

